=====Battery Charging=====


==Charging Menu Controls==

{{:ee:battery:img_20180214_153639719.jpg?nolink&400|}}


'-'            
  * Cycles through the charging options for the battery chemistry

'+'
  * Should cycle in the opposite direction of '-' 

'PORT' 
  * Switch between ports, it will also change battery chemistry

'MODE'         
  * Cycles between the Charging menu, Data View, and Settings Data.
    * Inside these options, use '-' to cycle through all the options.


'ENTER'        
  * A long press (~1 second) starts the charging cycle.
  * A short press cycles through the options on the screen, it lets you change the value of the fields

==Charging Instructions==

When charging the battery, make sure the settings match that of the battery. 
For the Tattu, it's a 16000 mAh, 4 Cell (4S), LiPo battery that charges at a maximum of 16 amps. We charge it at 8 amps, because it's easier on the battery and still charges the battery at a fast enough rate. 

Plug the battery sensing cable into the appropriate slot (4S for 4 cell).

{{:ee:battery:img_20180214_171228472_ll.jpg?nolink&400|}}

{{:ee:battery:img_20180214_171153227_ll.jpg?nolink&400|}}

Plug the battery power connector to the charger. 

{{:ee:battery:img_20180214_171135775_ll.jpg?nolink&400|}}

Long press Enter to start charging the battery when the correct settings are set on the charging menu.