This is an old revision of the document!
The following instructions should be used if you are running a Ubuntu 20.04 (xenial) derivative.
sudo sh -c 'echo "deb http://robosub.eecs.wsu.edu/repo/ /" > /etc/apt/sources.list.d/robosub.list' wget http://robosub.eecs.wsu.edu/repo/repository_key -O - | sudo apt-key add - sudo sh -c 'echo "deb http://packages.ros.org/ros/ubuntu xenial main" > /etc/apt/sources.list.d/ros-latest.list' wget https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -O - | sudo apt-key add - sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu xenial main" > /etc/apt/sources.list.d/gazebo-latest.list' wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add - sudo sh -c 'echo "deb https://packagecloud.io/github/git-lfs/ubuntu/ xenial main" > /etc/apt/sources.list.d/github_git-lfs.list' wget https://packagecloud.io/github/git-lfs/gpgkey -O - | sudo apt-key add - sudo aptitude update sudo aptitude install robosub-kinetic robosub-simulator-kinetic git-lfs git lfs install
To configure your path to know about ROS software, run
echo "source /opt/ros/kinetic/setup.bash" >> ~/.bashrc
Next, continue with the instructions on the getting start page.