This is an old revision of the document!
This page needs modification and should not be used until it is completed
The following instructions should be used if you are running a Ubuntu 20.04 (focal) derivative.
sudo sh -c 'echo "deb http://robosub.eecs.wsu.edu/repo/ /" > /etc/apt/sources.list.d/robosub.list' wget http://robosub.eecs.wsu.edu/repo/repository_key -O - | sudo apt-key add - sudo sh -c 'echo "deb http://packages.ros.org/ros2/ubuntu focal main" > /etc/apt/sources.list.d/ros-latest.list' wget https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -O - | sudo apt-key add - sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu focal main" > /etc/apt/sources.list.d/gazebo-latest.list' wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add - sudo sh -c 'echo "deb https://packagecloud.io/github/git-lfs/ubuntu/ xenial main" > /etc/apt/sources.list.d/github_git-lfs.list' wget https://packagecloud.io/github/git-lfs/gpgkey -O - | sudo apt-key add - sudo aptitude update sudo aptitude install robosub-kinetic robosub-simulator-kinetic git-lfs git lfs install
To configure your path to know about ROS software, run
echo "source /opt/ros/foxy/setup.bash" >> ~/.bashrc
Next, continue with the instructions on the getting start page.